Styrax

The air shower is a supporting device for the clean workshops and the assembly clean room, is used to blow the dusts attached to the surfaces of the people and objects entering the clean workshop, and also functions as an air brake to prevent non-purified air from entering the clean area. It is an effective device to clean up the surfaces of the persons and the objects and to prevent the outdoor air from invading the clean area. It has strong versatility, can be used along with all clean rooms and clean workshops, and is an ideal choice to establish a dust-free workshop.

LAF/BUF Controller
Description:
BUF ON/OFF Controller is used for ON/OFF controlling of Blower, UV Lamp & CF Lamp in Dynamic pass box, Bio safety cabinets and laminar air flow. The status of Blower, UV Lamp & CF Lamp is provided on display.
Features:
Advanced Micro controller based
ON/OFF Message Display
Relay O/P for Blower (up to 1 HP), UV Lamp & CF Lamp
ON/OFF Massage status indication with high intensity Bar LEDs
Status indication: ON, OFF-Blower, ON, OFF- UV Lamp & ON, OFF – CF Lamp
Blower Failure Status Indications
Soft touch Membrane / Capacitive Touch keypad
Easy for Instal

Sanrock manufactures Electronics Status Boards to display previous batch details and running batch details. This can be installed at outside of process area to know the current status and as well as previous batch details. These are integrated to Plant Material Tracking System (PMTS)
These Electronics Status Boards should display following parameters.
Previous Product
Batch No.
Product Name
Batch No.
Batch Size
Manufacturing Date
Expiry Date
Status
Specifications:
18.5” LCD display with Broadcom BCM2837B0, Cortex-A53(ARMv8) 64-bit SoC @ 1.4GHz
1GB LPDDR2 SDRAM
2.4GHz and 5GHz IEE

In order to increase operational and energy efficiency, you are looking for new ways to make managing your facility easier. Sanrock Automation can successfully integrate, install and maintain building management systems and provide life cycle support for facilities like yours, making it easier to increase comfort, safety and security for your occupants.

We offer a scalable range of building management and intelligent building solutions and services from individual subsystems to fully integrated intelligent buildings that reduce risk while delivering world class operating and energy efficie

Utility Management System
SANSOFT
Runtime System - SANSOFT 21 CFR Part 11 Compliance web based SCADA software.
Administration Module :
User Management
Device Management
Dashboard Module
Reports and Audit Trail Logs
Dashboard Module :
Login / logout
Tabular data presentation of configured devices
Pictorial presentation of data of devices
Alerts on key parameter changes
Scope In detail
User Management :
Login / Logout
Add/Edit/Del/View of users
Password complexity
Password Expiry
Locking of user after 3 wrong attempts
Unlocking by administrator
Device Management :
Add/Edit

In the process of material transfer from unclassified area to classified area pass box used. Pass box is rectangular box with two or three doors. The doors are interlocked such a way that doors cannot be open at the same time, due to which pressure losses and bacterial contamination doesn't take place throughout the material transferring process.

The prevention of simultaneous access of doors is been achieved by our Pass Box controller by ensuring that when one door for a Pass box is open then other doors closed.

In order to increase operational and energy efficiency, you are looking for new ways to make managing your facility easier. Sanrock Automation can successfully integrate, install and maintain building management systems and provide life cycle support for facilities like yours, making it easier to increase comfort, safety and security for your occupants.

We offer a scalable range of building management and intelligent building solutions and services from individual subsystems to fully integrated intelligent buildings that reduce risk while delivering world class operating and energy efficie

The STYRAX “Temperature and RH Transmitter” has been specially developed keeping process measurement requirements of CLEAN ROOMS in Pharmaceutical industries. RHT105 is a high-performance 4/3-wired Relative Humidity and Temperature Transmitter. Its relative humidity and temperature transmitter is available in surface mount, duct mount and remote sensor versions. This transmitter is accurate to 1.5% for relative humidity and within 0.3 °C for temperature.
Features :
Advanced Microcontroller based process measurement.
Software programmable measurement range settings.
5-point calibration for

GPS/Server based Wired Clocks
Master Clock
6 digit 7 segment LED display.
0.8” seven segment LED to display Hours and Minutes.
0.5” seven segment LED to display Seconds.
LED Color : Red or Green.
Accuracy : ±2minutes per year at 25°C.
Battery backup for RTC : 3.6VDC Lithium-Ion.
Communication : RS-485.
Time format : 24Hrs.
No. of Slave : 32 without repeater.
Operating Voltage : 230VAC 25Watt.
Dimensions : 90mm L x250mm W x 45mm D.
Slave Clock
4 digit 7 segment 1”/2”/4” LED display to display Hours and Minutes.
6 digit 7 segment 1” LED display.LED Color: Red or Green.
Accuracy

Features :
Advanced Microcontroller based DP measurement.
Software programmable channel ranges, units & resolution.
4 Digit, 0.56” bright LED display for displaying differential pressure.
Process parameter status indication with LEDs.
Process value violations display indication.
User selectable set limits for process value violation.
Inbuilt buzzer to audible process value violation.
Password protection for programming mode.
Software Calibration.
Proximity keypad to program DPI105DI and DPI105DE.
Specifications :
Input Type :
Inbuilt Integral Sensors
4 - 20mA
0 - 10VDC.
0 - 20

Features:
Door interlocking systems supports maximum of 16doors
Microcontroller based Door Interlocking System
User can configure Normally Closed mode or Normally Open mode
Configurable door closure time interval for 4 to 16 door interlocking systems
Pre-defined door closure time interval for 2 and 3 door interlocking systems
MODBUS RTU multi drop RS-485 serial communication for PLC, SCADA, etc.
Configurable door delay timer from Door Interlocking BMS System
Relay status Indications
“GO”,“WAIT” Door Status Indications along with Timer
It supports Emergency Stations with buzzer
It s

The Monitor has status LEDs for process violation indication. RH, Temperature and Differential pressure will display individually and data transfers to any master device on MODBUS RTU RS-485 communication. It also has communication diagnosis LED. The monitor has inbuilt buzzer for audible process violation. It has keypad to program and calibrate the instrument by user. It has Stainless steel Modular Face plate, which is designed as a mounting accessory for monitor suited for Brick and Modular wall for Clean Room applications where you need flush mounting mechanism.

Styrax Instruments India Pvt. Ltd., has been one of the prominent manufacturers and suppliers of Process Measure and Control Systems, Clean room Interlocking Systems, Automation Solutions and hi-tech security and access control systems.

Our systems and products are engineered with excellent application options and implementations. Having established our credentials in the domestic and international market. We possess the capability of catering to the diverse requirements across multifarious industries.